Horse Stalls

Browse our latest horse stall products!

Want Unique

Shop now for one of a kind horse stalls!

Check Us Out

View our most popular horse stall products!

See Our Work

Check out over 100 examples of Armour Horse Stalls installed!

Armour Horse Stalls creates all-aluminum, low-maintenance horse stalls, barn doors, gates, stall doors and grills for your barn. We use expert tradesmen to fabricate horse barn components using heavy duty, no rust, aluminum so your stall components will never rust and are easy to maintain.

Armour Companies has been manufacturing and shipping Full-Sized Aluminum, non-rusting horse stall components for decades.

ALL components arrive completely assembled and are delivered to our customers ready to install WITH all necessary hardware and fasteners INCLUDED for installation. NO hardware kits to purchase and NO product assembly upon arrival!

It takes approximately 18 fasteners to install an Armour Sliding Door and a 6-12 fasteners to install a front or divider grille. At Armour, we do the majority of the work for you! Armour includes detailed instructions and has a 24 hour dedicated technical advice hotline, in the event you have a question after hours or weekends.

The preventative maintenance of other stall components are not required with Armour’s non-rusting, aluminum, Stall Components. Armour horse stalls and gates are assembled by skilled tradesmen and use the highest quality aluminum materials available which enables us to deliver a quality horse stall product on to you, the end consumer.

Armour has pioneered our Much Copied Concealed Welding technique which is utilized throughout our product line yielding a strong, neat-in-appearance, uncluttered welded connection.

Other manufacturers offer horse stall doors and grilles that are “pictured” in an assembled state but require assembly, by you, of loose assorted pieces, shims, rubber or plastic inserts, washers and loose thin gauge vertical pickets (bars). When ordering a CUSTOMER ASSEMBLED component, it is a simple process to ship several boxes of loose pieces to YOU and offer Free Shipping .. It’s much less expensive since the process of assembling the component is borne by you, the purchaser. Armour eliminates the assembling process for you!

Often when building NEW equestrian stables or renovating existing barn stall areas its common to have varying measurements for each stall being considered which could possibly require some carpentry in order to achieve a precise fit for the components. Whether ONE stall or SEVERAL … we routinely manufacture the stall front, divider and window grilles for EACH stall per your measurements to the nearest Eighth Inch which avoids any unnecessary alterations or trimming to Armour products or YOUR stall areas. NO ASSEMBLY REQUIRED!

Armour will provide confirmed customers with drawings to record the specific stall size required for the project. Measurements taken on the job site can be emailed or faxed to our plant. These drawings will be utilized by skilled tradesmen in the manufacture of the components and then to identify the specific stall location once received back at your barn location. Each component built is identified and labeled for ease of installation and eliminating unnecessary carpentry or block work to fit. No Re-Measuring!

Armour horse stalls are unique in appearance and are sure to appeal to equine enthusiasts, equine facilities and barn contractors around the nation. With over 95 combinations of door tops and bottoms, finding an assembled product to suit any situation is easy. Sliding stall doors and hinged gates are offered in various standard sizes and customizing the size if necessary can be accomplished with little or no additional cost. Armour can assist you with friendly, informed staff that have decades of experience in the horse, as well as, metal fabrication industry.

If you are building a new barn construction, therapeutic riding center, veterinarian equine hospital or renovating an existing equine facility, Armour has an array of stall components in unique designs to meet any discriminating horse owner need. Armour’s product line includes sliding stall doors, double dutch doors, stall front grills, horse gates, end barn doors, horse stall packages and stall panels. If you can not find a barn accessory, please let us know and we will assist you in finding the component. 1-866-948-9210 If you know what you are looking for, you can also call us or browse horse stall products for sale and submit a quote to our experienced team.

Armour horse stalls and gates are assembled by skilled tradesmen and use the highest quality aluminum materials available which enables us to pass a quality horse stall product on to you, the end consumer.

Armour has pioneered the “concealed weld” technique and uses it throughout it’s horse stall product line which ensures

the welded connection to be uncluttered and neat in appearance. Interested in spending more time with your horses or riding? Armour’s aluminum components do not rust and do not need frequent maintenance therefore providing more free time for you. Doing what you enjoy!

At Armour, we do the majority of the work for you!

Armour includes detailed instructions and has a 24 hour dedicated technical advice hotline, in the event you have a question after hours or weekends.

Armour horse stalls for sale are unique in appearance and are sure to appeal to equine enthusiasts, equine facilities and barn contractors around the nation. With over 95 combinations of door tops and bottoms, finding a product to suite any situation is easy. Sliding stall doors and hinged gates are offered in various standard sizes and customizing the size can be accomplished with little or no additional cost.

Armour’s eco friendly, reusable, aluminum sliding door frames and stall components will outlast our iron counterpart and have less impact on the environment.

Over time the aluminum feature keeps your cost on horse stable components low. CNC capability increases the diversity of horse stall doors and stall front panel design. Armour is sure to be a perfect fit for your stable, barn or equine facility. Whether you are looking to purchase one horse gate or multiple horse stall fronts, whether you own Andalusians or miniatures, Armour can assist in finding a perfect and affordable horse stall system for you.

Call us today: 866.948.9210

Armour Horse Stalls creates all-aluminum, low-maintenance horse stalls, barn doors, gates, stall doors and grills for your barn. We use expert tradesmen to fabricate horse barn components using heavy duty, no rust, aluminum so your stall components will never rust and are easy to maintain.

Armour Companies has been manufacturing and shipping Full-Sized Aluminum, non-rusting horse stall components for decades.

ALL components arrive completely assembled and are delivered to our customers ready to install WITH all necessary hardware and fasteners INCLUDED for installation. NO hardware kits to purchase and NO product assembly upon arrival!

It takes approximately 18 fasteners to install an Armour Sliding Door and a 6-12 fasteners to install a front or divider grille. At Armour, we do the majority of the work for you! Armour includes detailed instructions and has a 24 hour dedicated technical advice hotline, in the event you have a question after hours or weekends.

The preventative maintenance of other stall components are not required with Armour’s non-rusting, aluminum, Stall Components. Armour horse stalls and gates are assembled by skilled tradesmen and use the highest quality aluminum materials available which enables us to deliver a quality horse stall product on to you, the end consumer.

Armour has pioneered our Much Copied Concealed Welding technique which is utilized throughout our product line yielding a strong, neat-in-appearance, uncluttered welded connection.

Other manufacturers offer horse stall doors and grilles that are “pictured” in an assembled state but require assembly, by you, of loose assorted pieces, shims, rubber or plastic inserts, washers and loose thin gauge vertical pickets (bars). When ordering a CUSTOMER ASSEMBLED component, it is a simple process to ship several boxes of loose pieces to YOU and offer Free Shipping .. It’s much less expensive since the process of assembling the component is borne by you, the purchaser. Armour eliminates the assembling process for you!

Often when building NEW equestrian stables or renovating existing barn stall areas its common to have varying measurements for each stall being considered which could possibly require some carpentry in order to achieve a precise fit for the components. Whether ONE stall or SEVERAL … we routinely manufacture the stall front, divider and window grilles for EACH stall per your measurements to the nearest Eighth Inch which avoids any unnecessary alterations or trimming to Armour products or YOUR stall areas. NO ASSEMBLY REQUIRED!

Armour will provide confirmed customers with drawings to record the specific stall size required for the project. Measurements taken on the job site can be emailed or faxed to our plant. These drawings will be utilized by skilled tradesmen in the manufacture of the components and then to identify the specific stall location once received back at your barn location. Each component built is identified and labeled for ease of installation and eliminating unnecessary carpentry or block work to fit. No Re-Measuring!

Armour horse stalls are unique in appearance and are sure to appeal to equine enthusiasts, equine facilities and barn contractors around the nation. With over 95 combinations of door tops and bottoms, finding an assembled product to suit any situation is easy. Sliding stall doors and hinged gates are offered in various standard sizes and customizing the size if necessary can be accomplished with little or no additional cost. Armour can assist you with friendly, informed staff that have decades of experience in the horse, as well as, metal fabrication industry.

If you are building a new barn construction, therapeutic riding center, veterinarian equine hospital or renovating an existing equine facility, Armour has an array of stall components in unique designs to meet any discriminating horse owner need. Armour’s product line includes sliding stall doors, double dutch doors, stall front grills, horse gates, end barn doors, horse stall packages and stall panels. If you can not find a barn accessory, please let us know and we will assist you in finding the component. 1-866-948-9210 If you know what you are looking for, you can also call us or browse horse stall products for sale and submit a quote to our experienced team.

Armour horse stalls and gates are assembled by skilled tradesmen and use the highest quality aluminum materials available which enables us to pass a quality horse stall product on to you, the end consumer.

Armour has pioneered the “concealed weld” technique and uses it throughout it’s horse stall product line which ensures

the welded connection to be uncluttered and neat in appearance. Interested in spending more time with your horses or riding? Armour’s aluminum components do not rust and do not need frequent maintenance therefore providing more free time for you. Doing what you enjoy!

At Armour, we do the majority of the work for you!

Armour includes detailed instructions and has a 24 hour dedicated technical advice hotline, in the event you have a question after hours or weekends.

Armour horse stalls for sale are unique in appearance and are sure to appeal to equine enthusiasts, equine facilities and barn contractors around the nation. With over 95 combinations of door tops and bottoms, finding a product to suite any situation is easy. Sliding stall doors and hinged gates are offered in various standard sizes and customizing the size can be accomplished with little or no additional cost.

Armour’s eco friendly, reusable, aluminum sliding door frames and stall components will outlast our iron counterpart and have less impact on the environment.

Over time the aluminum feature keeps your cost on horse stable components low. CNC capability increases the diversity of horse stall doors and stall front panel design. Armour is sure to be a perfect fit for your stable, barn or equine facility. Whether you are looking to purchase one horse gate or multiple horse stall fronts, whether you own Andalusians or miniatures, Armour can assist in finding a perfect and affordable horse stall system for you.

Call us today: 866.948.9210

Our Most Popular Horse Stall Products

Browse Many of Our Most Popular Products Available In Standard and Custom Sizes

Horse Stall Front Packages

These Horse Stall Packages are special ensembles of Armour's most popular products!

Sliding Horse Stall Doors

Armour offers a complete line of horse stall doors with multiple top and bottom features to choose from.

Dutch Doors

Armour manufactures a variety of Double Dutch Doors. These Hinged Double Panels allow the top and bottom to open and close independently.

Stall Grills

Grills are available in One, Two or Three inch between bar spacing throughout entire grill section. Standard and Custom sizes are available.

Have a question?
Contact our team,
we're happy to assist you!
contact
Toll-Free 800.876.7706
Fax 386.740.9077