Shopping cart is empty.
Call Today!(800)876-7706    "We Ship Anywhere"
Factory Direct Ordering    Monday-Friday 8-5 Saturday 9-3 EST
Home
Home
Portfolio
Portfolio
Portfolio

Armour Dutch Doors Overview

Half Dutch Doors

Double Dutch Doors

Armour manufactures a variety of barn doors, including barn Dutch Doors. Horse stall Dutch doors can be a simple 4'0" half gate or two double panels which allow the top and bottom to open and close independently.

Half Dutch Doors are used to retain horses in their stall and are the most economical of hinged stall gate systems. Double Dutch doors are primarily used on the back of stalls to allow access to the back paddock area. The solid double door top can be left open to allow ventilation and lower door closed to retain horse in stall. In some cases double dutch doors are used in the front of the stall. When this is necessary, half dutch bar top doors are recommended to promote adequate airflow.

 

Not split sliding double dutch doors

Half Dutch Doors

 

Half Dutch Doors arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. Economy half dutch doorAll lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Half Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Half Dutch Doors include two 6" zinc-plated "Tee-hinges," one zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Half Dutch Doors come in a standard size of 48" wide by 48" high. This half Dutch stall gate will fit your opening of 48-1/2" width and may be used as a single swing shutter in any 48-1/2" wide by 48-1/2" height opening. Custom sizes under 48" wide x 48" high are available.

 

Double Dutch DoorsCrossbuck double dutch door

 

Two double dutch door panels arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. All lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Double Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Double Dutch Doors include four 6" zinc-plated "Tee-hinges," two zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Double Dutch Doors arrive in a two standard size panels of 48" wide by 48" high. This Double Dutch stall door will fit your opening of 48-1/2" width by 97-1/2". Custom sizes under 48" wide x 96" high are available

 

You Are Here >Dutch Doors & Tack Doors
 

Economy Dutch Door - 48"w x96"h - $504

Product Code: NACBDD2
  • $504.00
  • Product Size Option*
    Product Size 47-1/2" w x 95" h (Opening Size 48" w x 96" h)
    Additional Hardware - Hook & Eye Set*
    Two Hook & Eye Sets (used to hold doors open) $10Two Hook & Eye Sets (used to hold doors open)
    Two Stainless Steel Hook & Eye Sets (used to hold top & bottom open) $24
    No Thanks, I don't need any Hook & Eye Sets
    Additional Hardware - Vee Chew Guard - used to prevent chewing on the door's "x" *
    I'd like 1 for the top of the "x" on the bottom door. $14
    I'd like 1 for each side of the "x" on the bottom door. $56
    1 for each side of the "x" on top & bottom $112
    No Thanks!
    Additional Hardware - Chew Guard Channel*
    1 Chew Guard Channel for the top of the bottom door. $221 Chew Guard Channel for the top of the bottom door.
    No Thanks!
    Stainless Steel Hinges * (Zinc Plated Hinges are included.)
    Four (4) Stainless Steel Hinges $80
    No Thanks, I'll take the included Zinc Plated Hinges
Economy Dutch Door - 48"w x96"h - $504
Economy Dutch Door - 48Economy Dutch Door - 48Economy Dutch Door - 48Economy Dutch Door - 48

Economy "No Trim" Crossbuck Double Dutch Door

Split Economy "NO TRIM" Crossbuck Double-Dutch Door Two Panels 

Two ECONOMY "No Trim" double dutch door panels arrive fully assembled with the highest quality materials available in the industry. Pictured is Armour's Economy Crossbuck Double Dutch Door, the time honored "X". Double Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. Painting or staining door lumber portion is recommended. With Armour products, all hardware is included. Double Dutch Doors include four 6" zinc-plated "Tee-hinges," two zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly.

  • Economy Dutch Doors do not have aluminum trim surrounding the lumber, so it saves you money!
  • Completely Assembled
  • Two 48" width x 48" height panels
  • Twin Panels of 5 layered, 3/4" thick lumber
  • Bonded with glue and wood screws at back of doors.
  • Wood screws installed counter sunk in critical areas for additional strength.
  • Painting or staining door lumber portion is recommended.
  • 6" Zinc Plated Tee-Hinges with all necessary fasteners included for installation.
  • *Stainless Steel Hinges and fasteners also available (additional cost)
  • Zinc-Plated Superlatch and latching receiver plates and hardware included with all doors.
  • Smooth surface panels on interiors of doors.
  • Crossbuck Fascia on exterior of door unless reverse fascia requested
  • Reverse Fascia available at no charge