Shopping cart is empty.
Call Today!(800)876-7706    "We Ship Anywhere"
Factory Direct Ordering    Monday-Friday 8-5 Saturday 9-3 EST
Home
Home
Portfolio
Portfolio
Portfolio

Armour Dutch Doors Overview

Half Dutch Doors

Double Dutch Doors

Armour manufactures a variety of barn doors, including barn Dutch Doors. Horse stall Dutch doors can be a simple 4'0" half gate or two double panels which allow the top and bottom to open and close independently.

Half Dutch Doors are used to retain horses in their stall and are the most economical of hinged stall gate systems. Double Dutch doors are primarily used on the back of stalls to allow access to the back paddock area. The solid double door top can be left open to allow ventilation and lower door closed to retain horse in stall. In some cases double dutch doors are used in the front of the stall. When this is necessary, half dutch bar top doors are recommended to promote adequate airflow.

 

Not split sliding double dutch doors

Half Dutch Doors

 

Half Dutch Doors arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. Economy half dutch doorAll lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Half Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Half Dutch Doors include two 6" zinc-plated "Tee-hinges," one zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Half Dutch Doors come in a standard size of 48" wide by 48" high. This half Dutch stall gate will fit your opening of 48-1/2" width and may be used as a single swing shutter in any 48-1/2" wide by 48-1/2" height opening. Custom sizes under 48" wide x 48" high are available.

 

Double Dutch DoorsCrossbuck double dutch door

 

Two double dutch door panels arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. All lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Double Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Double Dutch Doors include four 6" zinc-plated "Tee-hinges," two zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Double Dutch Doors arrive in a two standard size panels of 48" wide by 48" high. This Double Dutch stall door will fit your opening of 48-1/2" width by 97-1/2". Custom sizes under 48" wide x 96" high are available

 

You Are Here >Dutch Doors & Tack Doors
 

Endura Economy Crossbuck Dutch Door

Product Code: EWNACBDD2
  • $691.00
  • Additional Hardware - Hook & Eye Set*
    Two Hook & Eye Sets (used to hold doors open) $10Two Hook & Eye Sets (used to hold doors open)
    Two Stainless Steel Hook & Eye Sets (used to hold top & bottom open) $24
    No Thanks, I don't need any Hook & Eye Sets
    Stainless Steel Hinges * (Zinc Plated Hinges are included.)
    Four (4) Stainless Steel Hinges $80
    No Thanks, I'll take the included Zinc Plated Hinges
Endura Economy Crossbuck Dutch Door
Endura Economy Crossbuck Dutch DoorEndura Economy Crossbuck Dutch Door

ENDURA PANEL ECONOMY CROSSBUCK DOUBLE DUTCH DOOR 

Recommended Opening Measurements: 48" w x 96" h 

Product Number: EWCBDD2


  • Completely Assembled
  • Two 47-1/2" width x 47-1/2" height panels
  • No Aluminum Trim
  • 6" Zinc Plated Tee-Hinges with all necessary fasteners included for installation.
  • *Stainless Steel Hinges and fasteners also available (additional cost)
  • Zinc-Plated Superlatch and latching receiver plates and hardware included with all doors.
  • Crossbuck Fascia on one side of door
  • Smooth surface panels on reverse side of door

The Endura material is a dense PVC plastic product which is solid. Endura is not hollow and the material is not vinyl. The Endura panel is 1-1/2" thick and 3/4" in the non "x" areas.

Endura-panels have excellent insulation properties, impervious to water, mold, mildew and WILL NOT warp, rot or split... guaranteed! Armour offers products built with the Endura-panel material and NO RUST aluminum framing to create a product that will outlast traditional steel and lumber products. Standard and custom sizes are available upon request. Endura-panels arrive white in color and do not require paint or stain. 100% Acrylic Latex or Acrylic Latex with Polyurethane additives can be used to apply color to Endura-panels if color is desired.