Shopping cart is empty.
Call Today!(800)876-7706    "We Ship Anywhere"
Factory Direct Ordering    Monday-Friday 8-5 Saturday 9-3 EST
Home
Home
Portfolio
Portfolio
Portfolio

Armour Dutch Doors Overview

Half Dutch Doors

Double Dutch Doors

Armour manufactures a variety of barn doors, including barn Dutch Doors. Horse stall Dutch doors can be a simple 4'0" half gate or two double panels which allow the top and bottom to open and close independently.

Half Dutch Doors are used to retain horses in their stall and are the most economical of hinged stall gate systems. Double Dutch doors are primarily used on the back of stalls to allow access to the back paddock area. The solid double door top can be left open to allow ventilation and lower door closed to retain horse in stall. In some cases double dutch doors are used in the front of the stall. When this is necessary, half dutch bar top doors are recommended to promote adequate airflow.

 

Not split sliding double dutch doors

Half Dutch Doors

 

Half Dutch Doors arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. Economy half dutch doorAll lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Half Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Half Dutch Doors include two 6" zinc-plated "Tee-hinges," one zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Half Dutch Doors come in a standard size of 48" wide by 48" high. This half Dutch stall gate will fit your opening of 48-1/2" width and may be used as a single swing shutter in any 48-1/2" wide by 48-1/2" height opening. Custom sizes under 48" wide x 48" high are available.

 

Double Dutch DoorsCrossbuck double dutch door

 

Two double dutch door panels arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. All lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Double Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Double Dutch Doors include four 6" zinc-plated "Tee-hinges," two zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Double Dutch Doors arrive in a two standard size panels of 48" wide by 48" high. This Double Dutch stall door will fit your opening of 48-1/2" width by 97-1/2". Custom sizes under 48" wide x 96" high are available

 

You Are Here >Dutch Doors & Tack Doors
 

Flash Half Dutch - 36" w x 36" h - $408

Product Code: FLCBHD13X3
  • $408.00
  • Additional Hardware - Hook & Eye Set*
    Hook & Eye Set (used to hold door open) $5 Hook & Eye Set (used to hold door open)
    One Stainless Steel Hook & Eye Sets (used to hold gate open) $12
    No Thanks, I don't need a Hook & Eye Set
    Additional Hardware - Vee Chew Guard - Used to prevent chewing on the door's "x" *
    I'd like 1 for the top of the "x" on the bottom door $14
    I'd like 1 for each side of the "x" on the bottom door $56
    No Thanks!
    Stainless Steel Hinges * (Zinc Plated Hinges are included.)
    Two (2) Stainless Steel Hinges $40
    No Thanks, I'll take the included Zinc Plated Hinges
Flash Half Dutch - 36" w x 36" h - $408
Flash Half Dutch - 36Flash Half Dutch - 36Flash Half Dutch - 36Flash Half Dutch - 36

Flash Half Dutch 

Size: 36" width x 36" height

Recommended Opening Measurement: 36-1/2" width

Add a Little "FLASH" to Your Stall Doors. Arrives Installed on Door or Install Yourself and Save! Flash Panels can be added to an Existing Armour Dutch Door, check out the Accessories page for more info.

Flash-Panel Crossbuck Half Dutch Doors are an economical stall front entry gate or oversized window shutter. This door arrives fully assembled with the highest quality materials available in the industry. There are no loose pieces, no lumber to buy and nothing to put together. All lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. These time honored "x" Half Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. Painting or staining door lumber portion is recommended. With Armour products, no additional hardware kit is necessary, all hardware is included with purchase. Half Dutch Doors include two 6" zinc- plated "Tee-hinges," one zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Half Dutch Doors come in a standard size of 48" wide by 48" high. This Flash-Panel Crossbuck Dutch stall gate will fit your opening of 48-1/2" width and may be used as a single swing shutter in any 48-1/2" wide by 48-1/2" height opening.

  • Add a Little "FLASH" to Your Stall Doors
  • Arrives Installed on Door or Install Yourself and Save!
  • Add to an Existing Armour Dutch Door
  • Completely Assembled Stall Gate with Hardware
  • Old World Crossbuck "x" Design
  • One 36" width x 36" height panel
  • Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
  • Full vertical & horizontal channel coverage on both sides of door for maximum strength and protection
  • Painting or staining door lumber portion is recommended.
  • 6" Zinc Plated Tee-Hinges with all necessary fasteners included for installation.
  • *Stainless Steel Hinges and fasteners also available (additional cost)
  • Zinc-Plated Superlatch and latching receiver plates and hardware included with all gates.
  • Smooth surface panels on interiors of doors.
  • All lumber secured with glue and countersunk wood screws on rear panels.