Shopping cart is empty.
Call Today!(800)876-7706    "We Ship Anywhere"
Factory Direct Ordering    Monday-Friday 8-5 Saturday 9-3 EST
Home
Home
Portfolio
Portfolio
Portfolio

Armour Dutch Doors Overview

Half Dutch Doors

Double Dutch Doors

Armour manufactures a variety of barn doors, including barn Dutch Doors. Horse stall Dutch doors can be a simple 4'0" half gate or two double panels which allow the top and bottom to open and close independently.

Half Dutch Doors are used to retain horses in their stall and are the most economical of hinged stall gate systems. Double Dutch doors are primarily used on the back of stalls to allow access to the back paddock area. The solid double door top can be left open to allow ventilation and lower door closed to retain horse in stall. In some cases double dutch doors are used in the front of the stall. When this is necessary, half dutch bar top doors are recommended to promote adequate airflow.

 

Not split sliding double dutch doors

Half Dutch Doors

 

Half Dutch Doors arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. Economy half dutch doorAll lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Half Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Half Dutch Doors include two 6" zinc-plated "Tee-hinges," one zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Half Dutch Doors come in a standard size of 48" wide by 48" high. This half Dutch stall gate will fit your opening of 48-1/2" width and may be used as a single swing shutter in any 48-1/2" wide by 48-1/2" height opening. Custom sizes under 48" wide x 48" high are available.

 

Double Dutch DoorsCrossbuck double dutch door

 

Two double dutch door panels arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. All lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Double Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Double Dutch Doors include four 6" zinc-plated "Tee-hinges," two zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Double Dutch Doors arrive in a two standard size panels of 48" wide by 48" high. This Double Dutch stall door will fit your opening of 48-1/2" width by 97-1/2". Custom sizes under 48" wide x 96" high are available

 

You Are Here >Dutch Doors & Tack Doors
 

TG Dutch Door - 48" w x 96" h - $761.00

Product Code: TGDD2
  • $761.00
  • Lumber Option*
    Horizontal
    Vertical
    Size Option*
    Product Size 48" w x 96" h (Opening Size 48-1/2" w x 97" h)
    Product Size 47-1/2" w x 95" h (Opening Size 48" w x 96" h)
    Additional Hardware - Hook & Eye Set*
    Two Hook & Eye Sets (used to hold doors open) $10Two Hook & Eye Sets (used to hold doors open)
    Two Stainless Steel Hook & Eye Sets (used to hold top & bottom open) $24
    No Thanks, I don't need any Hook & Eye Sets
    Stainless Steel Hinges * (Zinc Plated Hinges are included.)
    Four (4) Stainless Steel Hinges $80
    No Thanks, I'll take the included Zinc Plated Hinges
    Astragal * - (horizontal aluminum trim that covers the 1/2" gap between the two doors)
    Astragal $22
    No Thanks!
TG Dutch Door - 48" w x 96" h - $761.00
TG Dutch Door - 48TG Dutch Door - 48TG Dutch Door - 48TG Dutch Door - 48

Tongue & Groove Double Dutch Door


Two Tongue & Groove double dutch door panels arrive fully assembled with the highest #1 grade T&G on the market. There are no loose pieces, no lumber to buy and nothing to put together. The Tongue & Groove lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. T&G Double Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. Painting or staining door lumber portion is recommended. With Armour products, no additional hardware kit is necessary, all hardware is included. T&G Double Dutch Doors include four 6" zinc-plated "Tee-hinges," two zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Tongue & Groove Double Dutch Doors arrive in a two standard size panels of 48" wide by 48" high. This Double Dutch stall door will fit your opening of 48-1/2" width by 97-1/2". Custom sizes are available.

Also available in two panels of 47-1/2" wide by 47-1/2" high.

  • Completely Assembled
  • Two 48" width x 48" height panels
  • #1 Southern Yellow Pine 6" Tongue and Groove Design
  • T&G lumber is available in horizontal or vertical design
  • All Edges surrounded with heavy gauge, "non-rusting" Mitre-Cut ALUMINUM channeling secured with wood screws.
  • Painting or staining door lumber portion is recommended.
  • 6" Zinc Plated Tee-Hinges with all necessary fasteners included for installation.
  • *Stainless Steel Hinges and fasteners also available (additional cost)
  • Zinc-Plated Superlatch and latching receiver plates and hardware included with all doors.
  • Smooth surface panels on interiors of doors.
  • All lumber secured with glue and countersunk wood screws on rear panels.
  • Reverse Fascia available at no charge.