Horse Stalls Gossip Gates

#TGGG3
6" T&G Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	Completely Assembled.
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber).
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength.
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	Smooth surface inside door panel
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out T&G Sliding Door

#CBGG3
Crossbuck Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	Completely Assembled.
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	Smooth surface inside door panel
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Crossbuck Sliding Door
	Check out our "VEE" Chew Guard

#FLCBGG3
Flash-Panel Crossbuck Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	Add a Little "FLASH" to Your Stall Doors
	Arrives Installed on Door or Install Yourself and Save!
	Add to an Existing Armour Dutch Door
	Completely Assembled.
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	Smooth surface inside door panel
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Flash-Panel Crossbuck Sliding Door

(click for larger view)

#WINDGG3
Windsor Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	DOORS ARRIVE UNPAINTED AND READY FOR YOUR FAVORITE COLOR APPLICATION
	CUSTOM Name or Logo Available on Door Front for Additional Cost
	COMPLETELY ASSEMBLED WITH HARDWARE
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	Smooth surface inside door panel
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Windsor Sliding Door

(click for larger view)

#STANDGG3
Windsor Standing
Horse Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	DOORS ARRIVE UNPAINTED AND READY FOR YOUR FAVORITE COLOR APPLICATION
	SILHOUETTES are manufactured from 3/4” thick stock in one piece
	Completely Assembled
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	Smooth surface inside door panel
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Windsor Standing Horse Sliding Door

(click for larger view)

#JUMPGG3
Windsor Jumping
Horse Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	DOORS ARRIVE UNPAINTED AND READY FOR YOUR FAVORITE COLOR APPLICATION
	SILHOUETTES are manufactured from 3/4” thick stock in one piece
	Completely Assembled.
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	Smooth surface inside door panel
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Windsor Jumping Horse Sliding Door

(click for larger view)

#REARGG3
Windsor Rearing
Horse Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	DOORS ARRIVE UNPAINTED AND READY FOR YOUR FAVORITE COLOR APPLICATION
	SILHOUETTES are manufactured from 3/4” thick stock in one piece
	Completely Assembled.
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	Smooth surface inside door panel
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Windsor Rearing Horse Sliding Door

#SMOOTHGG3
Smooth Lumber
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	Completely Assembled.
	Smooth Lumber fascia on Interior and Exterior
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	All lumber secured with glue and countersunk wood screws on rear panels.

#COOLGG3
Aluminum Coolbreeze
Hinged Gossip Gate
4'-0" width x
5'-0" height

**

	4'-0" width x 5'-0" height
	Completely Assembled. Nothing to Put Together.
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure
	Increased air flow provides instant cooling and fresh air at all times.
	Allows Owner to Easily See Inside Foals Stall
	Ventilation as well as Socialization for Foals
	Aluminum 1" Vertical round tubing.
	1" for Foal's or Mini's - Between Picket Spacing Throughout Grille
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Instant Ventilation to Air Bound Stalls
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for lumber installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.

#COOLWSPGG3
Coolbreeze Gossip Gate
with Scuff Panel
4'-0" width x
5'-0" height

**

	4'-0" width x 5'-0" height
	Completely Assembled. Nothing to Put Together.
	Tongue & Groove lumber Scuff Panel on bottom half of gate.
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure
	Increased air flow provides instant cooling and fresh air at all times.
	Ventilation as well as Socialization for Foals
	Aluminum 1" Vertical round tubing.
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Instant Ventilation to Air Bound Stalls
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for lumber installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.

#CBHD1
Crossbuck Lumber
Half Dutch Gate
4'-0" width x
4'-0" height

**

	Completely Assembled Stall Gate with Hardware
	Old World Crossbuck "x" Design
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	Full vertical & horizontal channel coverage on both sides of door for maximum strength and protection
	Periodic maintenance, such as painting or staining is recommended.
	6" Zinc Plated Tee-Hinges with all necessary fasteners included for installation.
	Zinc-Plated Superlatch and latching receiver plates and hardware included with all gates.
	Smooth surface inside door panel.
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Double-Dutch Door

#TGHD1
6" T&G Lumber
Half Dutch Gate
4'-0" width x
4'-0" height

**

	Completely Assembled Stall Gate with Hardware
	#1 Southern Yellow Pine 6" Tongue and Groove Design
	T&G lumber is available in horizontal or vertical design
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	Full vertical & horizontal channel coverage on both sides of door for maximum strength and protection
	Periodic maintenance, such as painting or staining is recommended.
	6" Zinc Plated Tee-Hinges with all necessary fasteners included for installation.
	Zinc-Plated Superlatch and latching receiver plates and hardware included with all gates.
	Smooth surface inside door panel.
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Double-Dutch Door

#TVGG3
Taube Vent-a-bar
Zephyr-Top
Gossip Gate
4'-0" width x
5'-0" height

**

	4'-0" width x 5'-0" height
	Completely Assembled
	Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
	Increased air flow provides instant cooling and fresh air at all times.
	Allows Owner to Easily See Inside Foals Stall
	Ventilation as well as Socialization for Foals
	Custom Sizes - Makes Renovations a Snap! Send Us Your Measurements
	Completely Assembled Units - Nothing to Put Together Vertical Pickets are 1" Round Schedule 40 Aluminum Tubing
	1" for Foal's or Mini's - Between Picket Spacing Throughout Grille
	Heavy Gauge 1/8" Thick Angle Horizontals & Verticals -Picture Framed
	"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
	Full height vertical channel materials both sides of door for maximum strength
	Concealed "weldments" at Zephyr-Top to channel area underside.
	Surrounded lumber fascias (channels protect all four edges of lumber panels)
	Outside posts capped with ALUMINUM plates (concealed weldments also)
	Periodic maintenance, such as painting or staining is recommended.
	Instant Ventilation to Air Bound Stalls
	6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
	"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
	All lumber secured with glue and countersunk wood screws on rear panels.
	Check out the Coolbreeze Sliding Door
	"Many agree that older barns are gorgeous, but are they good for horses? One of the biggest issues is ventilation--is your horse getting enough air?"
	Check out www.thehorse.com under barns/arena manufacturer

#SG3
Stallion Guard
made to fit only
Armour Gossip Gates

**

	Vertical pickets of 1 inch diameter round schedule 40 aluminum pipe
	Heights available in 4'-0" and 3'-0" or any size in between
	Picket spacing are 3 inches between bars throughout grilles.
	Easily mounts
	All connecting hardware included
	Converts Armour Gossip Top to a full bar top gate
	One piece construction
	Does not interfere with function of gate - moves with gate.
	Perfect for temporary restraint.

** Items purchased will be through our affiliate website aluminumhorsestalls.com
Please note that we will contact you with the shipping charges after you place the order.