Stall Dividing or Partition Grilles are the bar (or grille) section that can be installed between two stalls. Divider Grilles fit vertically below the stall header and above the 4'0" tall stall dividing wall. If you are looking for stall grilles for the stall front area of the stall, please check out our Stall Front Grilles tab above. If you are looking for grilles to place in a stall window opening, please check out the Stall Window Grilles tab above.

 

Dividing or Partition Grilles are also used to increase airflow, visualization and/or visitation throughout the barn. If you have an existing stall dividing wall that is 1-3/4" thick or larger (or plan to build one) then the C Series Grille is the correct product for your barn! If you plan to install a removable 1-1/2" thick    "foaling wall" between two stalls, then consider using our L Series Grilles with Receiver Channels. Receiver Channel are "u" shaped channel that mount vertically to your stall end posts or wall. Once the Receiver Channels are in place, lumber boards can be placed into the channels horizontally to construct dividing or partition walls.

‚Äčhorse stall wall  aluminum channel with lumber added  horse stall divider wall

 

Stall Divider Grilles are assembled using 1" diameter round vertical bars with 3", 2" or 1" between bar spacing (choose when ordering) and arrive welded as one (8'0" length or less) or two pieces (when you order 8'0-1/8" length grills or larger). Predrilled fastener holes are provided for quick and easy installation on the top and bottom horizontal portion of the grille which is constructed using angle or channel material. See Understanding L Series Grilles vs. C Series Grilles below for more details. 

 

Understanding L Series Grilles vs. C Series Grilles:

 

L Series Stall Grilles attach to 1-1/2" lumber at the top and bottom horizontal area of the grille. The opening measurement to install this grill needs to be 4'0" high (or tall) by whatever length you choose. Fasteners are provided for installation.

 

C Series Stall Grilles attach to any surface of 1-3/4" wide or wider. C Series grilles are traditionally used for concrete block openings or lumber openings that have a sill greater than 1-3/4". The component is fastened to your 1-3/4" or wider surface at the top and bottom horizontal area of the grille. The opening measurement to install this grille needs to be 4'0-1/8" high (or tall) by whatever length (plus 1/8 of an inch) you choose. Fasteners are NOT provided with C Series Grilles.