stall divider grille    Lift out panel on stall grillehorse stall grille

A Stall Window Grille is used to fill a window opening which is typically located in the back of the stall next to the Dutch door. The Window Grille assists in increasing airflow, visualization and visitation of the stall occupant. The bottom of a Window Grille generally starts 4-5' off the stall floor and can range from 36-48" tall. Armour can custom manufacture any height and width stall window grille, so please give a call to one of our knowledgable stall if you don't see a size that you might require. If you are looking for stall grilles for the stall front area of the stall, please check out our Stall Front Grilles tab above. If you are looking for stall grilles for between two stalls, please check out our Stall Dividing/Partition Grilles tab above.

 

Stall Window Grilles are assembled using 1" diameter round vertical bars with 3", 2" or 1" between bar spacing (choose when ordering) and arrive welded as one (8'0" length or less) or two pieces (when you order 8'0-1/8" length grills or larger). Predrilled fastener holes are provided for quick and easy installation on the top and bottom horizontal portion of the grille which is constructed using angle or channel material. See Understanding L Series Grilles vs. C Series Grilles below for more details. Window Grilles can have an added feature called a Lift Out Panel.  A Lift Out Panel is a section of grille that is the full height ordered x 24" wide that can be completely removed from the grille. This is a good option if the stall window has glass that needs to be cleaned from time to time or if you plan to allow the stall inhabitant to hang it's head out of the stall.  (Place photo of lift out panel on this page)

 

If your window grille sill is 1-3/4" thick or larger then the C Series Grille is the correct product for your barn! If your window grille sill is 1-1/2" thick then use Armour's L Series Grilles

Understanding L Series Grilles vs. C Series Grilles:

 

L Series Stall Grilles attach to 1-1/2" lumber at the top and bottom horizontal area of the grille. The opening measurement to install this grill needs to be 4'0" high (or tall) by whatever length you choose. Fasteners are provided for installation.

 

C Series Stall Grilles attach to any surface of 1-3/4" wide or wider. C Series grilles are traditionally used for concrete block openings or lumber openings that have a sill greater than 1-3/4". The component is fastened to your 1-3/4" or wider surface at the top and bottom horizontal area of the grille. The opening measurement to install this grille needs to be 4'0-1/8" high (or tall) by whatever length (plus 1/8 of an inch) you choose. Fasteners are NOT provided with C Series Grilles.